Firmware and FPGA systems built for the edge.
Bare-metal and RTOS firmware, hardware-software co-design, and FPGA acceleration for products that must boot in milliseconds, sip power, and keep running when the cloud goes dark.
We engineer embedded systems from schematic review to production firmware: STM32, ESP32, nRF52, NXP, and custom SoC bring-up with FreeRTOS, Zephyr, or bare-metal stacks tuned for determinism and power budgets.
For signal-heavy workloads we design FPGA pipelines in Verilog/VHDL — DSP front-ends, high-speed acquisition, and hardware accelerators that outperform GPU inference on latency-critical paths.
Production-grade engineering outcomes
Scoped deliverables with clear acceptance criteria — not open-ended consulting hours.
MCU Firmware
Production firmware on STM32, ESP32, nRF52, NXP, and PIC with OTA support.
RTOS & BSP Development
FreeRTOS, Zephyr, and Azure RTOS ports with driver stacks and power management.
FPGA Design
Verilog/VHDL RTL, Vivado/Quartus flows, timing closure, and on-chip debugging.
PCB & Hardware Co-Design
Schematic review, KiCad/Altium layout support, and DFM for manufacturing handover.
DSP & Signal Processing
Filter chains, FFT pipelines, and real-time acquisition on FPGA and MCU.
Linux Drivers & Edge
Yocto builds, custom kernel modules, and embedded Linux productisation.
The tools we deploy in production
Battle-tested frameworks, platforms, and infrastructure — chosen for reliability, not hype.
MCUs & SoCs
RTOS & Firmware
FPGA
Protocols
EDA & PCB
Toolchains
How enterprises buy and scale this capability
Clear engagement models, buyer alignment, and commercial outcomes — so procurement and engineering stay in sync.
Buyer Personas
- Hardware founders needing firmware to match their PCB spin
- Defence & aerospace teams requiring deterministic embedded stacks
- Industrial OEMs extending product lines with connected edge devices
- MedTech companies needing low-power, certifiable firmware paths
Engagement Models
- Firmware bring-up sprint on existing hardware (2–6 weeks)
- Full hardware-software co-design from requirements to EVT/DVT
- FPGA acceleration study with latency/throughput benchmark report
- Embedded maintenance retainer with OTA and security patch cadence
Commercial Outcomes
- Faster time-to-market on hardware spins with parallel firmware track
- Documented power, boot-time, and memory budgets for product specs
- Manufacturing-ready flash scripts, test jigs, and calibration flows
- Reduced field failures via structured HAL and regression test suites
Procurement Fit
- Full source, schematics, and bitstream delivery — you own the IP
- Milestone billing aligned to EVT, DVT, and production-ready gates
- CE/FCC/BIS pre-compliance support documentation for certification
- Senior embedded engineers in India with hardware lab access
Where this lands in the real world
Industrial Controllers
PLC-adjacent edge controllers with deterministic I/O and fieldbus support.
Medical Devices
Low-power sensing, data logging, and wireless upload with safety-aware design.
Defence Electronics
Ruggedised acquisition, encryption, and signal-processing on FPGA.
Consumer IoT
Battery-powered connected products with secure OTA and provisioning.
Telecom & RF
SDR front-ends, modem interfaces, and high-speed data capture.
Automotive Edge
CAN/LIN gateways, sensor fusion ECUs, and diagnostic interfaces.
// IN SHORT
Embedded systems and FPGA development at TechieYan
TechieYan is an embedded systems company in Hyderabad. We write firmware for STM32, ESP32 and nRF52 microcontrollers, build RTOS-based and low-power devices, design FPGA logic in Verilog and VHDL, and design the PCBs they run on. Teams use us when they have hardware ideas or boards ready but no firmware or FPGA engineers.
The boards our firmware runs on are designed by the same team — see our PCB design and electronics service.
// HOW A PROJECT RUNS
From first call to handover
- 1. Free technical callWe review your hardware, existing code and what the device must do.
- 2. Fixed-scope proposalArchitecture, MCU or FPGA choice, milestones and test criteria.
- 3. Bring-up and driversBoard bring-up, peripheral drivers and a first working build on your hardware.
- 4. Feature build and testingApplication firmware, RTOS tasks, power optimisation, OTA and test reports.
- 5. HandoverSource code, build and flashing instructions, documentation. You own everything.
// WHAT AFFECTS THE COST
What decides the price of your project
- Number of peripherals, sensors and communication interfaces
- Whether a new PCB is needed or firmware runs on existing hardware
- Real-time, safety and low-power requirements
- FPGA logic size and verification depth
- OTA updates, bootloader and security features
Every project gets a fixed-scope proposal before work starts. Send your requirement or call +91 70755 75787 for a free estimate.
// RELATED WORK
Projects we have built
// START YOUR EMBEDDED PROJECT
Tell us what you're building
A senior engineer replies within one business day. NDA-friendly, fixed-scope proposal. Business enquiries only.
Prefer to talk? Call +91 70755 75787 (Mon–Sun, 9am–9pm IST)